Because what I am building is a little less forgiving...
It's a black powder gun. Specifically, a .54 caliber Lymans Plains Pistol. (http://www.trackofthewolf.com/Categories/PartDetail.aspx/628/1/LYMAN-GPP-54-K)
Here is the kit laid out:
It may look like all you have to do is assemble all the parts together, but all the parts are actually bare and raw. The walnut stock is not sized correctly, and it is unstained and unfinished. Once you put the parts onto the stock, you will see that the wood is cut really big and does not align with the metal parts so you have to shave and sand the wood until they are level with the metal. This is mostly around the the trigger guard, tung and barrel. The metal on the tung and barrel is not oxidized so you need to brown or blue it in order for it to be ready for the elements. Also some people like to file the engravings onto the barrel down so it is not visible.
My ultimate goal for this project is to actually decorate the gun with some engraving and decorations of that period (1830s). But I would be happy just finishing the gun itself.
I am still slowly getting all the materials in place and I should really start with carving out the stock. However, I wanted to first test out some of the sand paper I got and try some sanding techniques. This is pretty basic stuff, but I thought it would be fun to get my feet wet with sanding.
I got four different grits of sandpaper: 600, 400, 320, 220. The lower the number, the rougher the grit.
Ok so let's start with the rough grit and move on down to the fine grit. See the before and after here:
![]() |
![]() |
| Before | After |
I am using some of these books as resources:
The last thing to do with the sanding is to dampen the wood with some water, and let it dry. This brings out the teeth of the wood as it swells a bit from the water. Once it is dry, we can sand the wood again with the sand paper that we used previously. We do not want to scratch the wood with new grit so the old used paper is perfect for this. Do this a couple times again until the teeth do not show after dampening.
That's it for this first post! Just an experimentation with the sand paper :)
Next post, I will showoff the vice and filers I got!






No comments:
Post a Comment